I recently returned to GPUGrid after a long absence and haven't been having any problems (that I know of) until this ethTRYP workunit errored out overnight. Stderr out is:

<core_client_version>6.12.34</core_client_version>
<![CDATA[
<message>
- exit code 98 (0x62)
</message>
<stderr_txt>
# Using device 0
# There is 1 device supporting CUDA
# Device 0: "GeForce GTX 570"
# Clock rate: 1.46 GHz
# Total amount of global memory: 1275658240 bytes
# Number of multiprocessors: 15
# Number of cores: 120
MDIO: cannot open file "restart.coor"
ERROR: get_Dvec() element 0 (b)
called boinc_finish

</stderr_txt>
]]>

I'm not sure if these are to be expected every once in a while or if it's indicative of a problem with the host or GPU.

Thanks for any words of advice.

MarkR
____________

Unfortunately there's a rate of 22% of failure for these tasks. Sources are several, from abortions via GUI to unknown app errors.

Most of these WUs are running fine so I'd discard the bug cause. You may check out skgiven's suggestions.

cheers,
i

Thanks for the feedback, you guys.

I don't overclock and I don't believe I have any overheating issues in this host. If I see more errors, I'll try some of the other things like dedicating a CPU, changing the driver, etc. Otherwise, I'll just chalk this one up to bad luck.

MarkR
____________

Just an FYI in case it's worthwhile, the WU I referenced in my original post resulted in compute errors for two other hosts before being successfully completed.

And, although it's technically off-topic, this metTRYP errored out for my host and two others and has been sent to a fourth.

[edit]Now four errors and sent to a fifth host... :-)[/edit]
____________

Just an FYI in case it's worthwhile, the WU I referenced in my original post resulted in compute errors for two other hosts before being successfully completed.

And, although it's technically off-topic, this metTRYP errored out for my host and two others and has been sent to a fourth.

[edit]Now four errors and sent to a fifth host... :-)[/edit]

Just an FYI in case it's worthwhile, the WU I referenced in my original post resulted in compute errors for two other hosts before being successfully completed.

And, although it's technically off-topic, this metTRYP errored out for my host and two others and has been sent to a fourth.

[edit]Now four errors and sent to a fifth host... :-)[/edit]

Some tasks end up being corrupted and error out serially and end up dying. Again, causes are a mystery but the impact is very small on the batch overall.

I apologize for the inconveniences anyway.

i